Wireless Microphone

Mipro AT-90WA

Choose Options

Price
AT-90WA Log Antenna RM 4,000 each

* Required 2 pcs to be installed with AD-708

  • A bi-functional log antenna for professional receiving and transmitting applications. Optimized for 470 – 1,000 MHz, it is compatible with US and EU new telecom regulations. It has a 4 – 6 dBi gain which is ideal for any installation requiring specific directionality. The wideband ACT-90Wa can be easily distinguished from its predecessor, the AT-90, by its new “W-Shaped” design.
  • Two input connectors: “TX/RX” connector can be connected to a transmitter or receiver, however, connection to a short coaxial cable is recommended when connected to a receiver. “RX” connector (cannot be connected to a transmitter) has a built-in 0 – 12 ± 1 dB gain adjustable booster and thus provides extended reception range and compensates the signal loss of coaxial cable to improve reception range and signal quality.
  • The power of gain controllable booster can be provided by a MIPRO AD-708 antenna divider or any MIPRO ACT Series receivers which provides bias by adding an adjustor on their antenna connectors.
  • Required 2 pcs to be installed with AD-708

    • Datasheet AT-90Wa Datasheet [PDF]
    Frequency Range UHF 470 – 1,000 MHz
    Antenna Gain 4 – 6 dBi
    3-dB Beam Width 75° Vertical; 130° Horizontal
    Booster Gain RX Connector: 0 – 12 ± 1 dB gain adjustable;
    TX/RX Connector: 0 dB
    VSWR < 2:1
    Voltage Range of RX Connector 8 – 15 V DC
    Power Consumption RX Connector: 1.3 W / 8 V DC;
    TX Connector: 0 mW
    Impedance 50 Ω
    Connector 2 × TNC female
    Dimension (W × H × D) 319 × 270 × 25 mm | 12.5 × 10.6 × 1 "
    Net Weight Approx. 430 g | 15.2 oz
    Note Refer to actual product in the event of product description discrepancy.