Wireless Microphone

Mipro TA-80

Choose Options

Price
TA-80 UHF Plug-on Transmitter RM 5,000 each

  • The TA-80 has a flat and wide frequency response, ultra-low T.H.D. and noise floor, fast transient response, strong anti-interference and high S/N ratio characteristics. These superior characteristics resolve the problems of tangling microphone cables and the deterioration of analog transmission characteristics, making the TA-80 the best system to reproduce the natural sound of any premium wired microphone.
  • With the balanced XLR mic input jack for installing on any condenser microphone, the TA-80 also provides 8 gain levels and a built-in switchable 12 / 48V, up to 10 mA current load phantom power for condenser microphones. The phantom power can be switched off for use with dynamic microphones.
  • A built-in high-capacity lithium battery enables a continuous 5 to 8 hours of use per charge. The TA-80 can be recharged by dropping it into an intelligent MP-80 charger or by removing the single battery cell from the TA-80 and placing it into the charger. The TA-80 has reverse polarity protection and battery replacement is fast and easy.
  • The TA-80 is compact, lightweight and ruggedly built. The streamlined aluminum housing is splash-proof with strict isolation of spurious and external noise interference. It has a built-in high efficiency transmitting antenna and a green backlit LCD clearly displays operation parameters. The TA-80 is compatible with MIPRO’s ACT-80/80R miniature digital receivers for a variety of professional audio applications.

    • Datasheet TA-80 Datasheet [PDF]
    Housing Aluminum alloy
    Frequency Range 480 ~ 960 MHz (country dependent)
    Switching Bandwidth 64 MHz
    RF Output Power 10 mW / 50 mW switchable (country dependent)
    Spurious Emissions ≦ -60 dBc
    Antenna Internal
    Modulation Type Digital modulation fixed envelope
    AF Input Level 2 V max. at AF gain = 0 dB
    7 V max. at AF gain = -12 dB
    20 V P-P by protective circuit
    LCD Display Group, Channel, Frequency, AF gain, Low-cut, Limiter, Encryption status, RF power, Phase, Lock status, Mute mode, Battery status & Error codes
    Gain Setting +30 dB, +24 dB, +18 dB, +12 dB, +6 dB, 0 dB, -6 dB, -12 dB , -18 dB (9 settings). 0 dB = microphone sensitivity
    Phantom Power Selectable 12 V and 48 V at 10 mA max.
    AF Frequency Response 20 Hz ~ 20 kHz, selectable 100 Hz low cut filter.
    Mic Input Balanced XLR
    Battery Type 1 x ICR-18500 rechargeable lithium battery
    Charger MP-8T / MP-80 (with an adaptor plug MPA-80)
    Battery Life > 8-hour for RF power at 10 mW and phantom power off.
    > 4.5-hour for RF power at 50 mW and 48 V at 2 mA phantom power on.
    Current Consumption Approx. 140 mA (Low power, phantom power off)
    Dimensions (W × H × D) 44 × 114 × 37 mm | 1.7 × 4.5 × 1.5 "
    Net Weight Approx. 165 g | 5.8 oz
    Note Refer to actual product in the event of product discrepancy. Frequency range and maximum deviation comply with the regulations of different countries.